Railroad Crossing Safety for Commercial Vehicles

Originally posted at www.impactrecovery.com

Railroad crossing safety takes on special importance where commercial vehicles are concerned.  When a train collides with a commercial motor vehicle (CMV), the total amount of damage done is far greater than with a passenger car.  This is because commercial vehicles are significantly larger and weigh much more.  For example, consider a semi pulling a trailer being struck by a train that stretches more than a mile in length.  The sheer mass of the objects involved in the wreck makes the results for more catastrophic.

Additionally, commercial vehicles like school buses usually carry large numbers of people.  If a bus stalls on a crossing grade, then the results can be devastating for many, many people.  One of the worst accidents in transportation history occurred on October 25, 1995, when a school bus carrying high school students in Fox River Grove, Illinois was struck by an oncoming freight train.  Seven students died and 21 more were injured, some critically.

Studies show that many commercial drivers are under-trained when it comes to knowing how to cross rail grades safely.  Unless and until this situation changes, the specter of more deaths from train-CMV collisions will continue to plague communities across the United States.

It’s important to note that railway crossing rules for commercial vehicles differ in many important ways from those for passenger cars and trucks.  This article will look at safety procedures for both professional truckers and bus drivers.

CMV Procedures for Crossing Railroad Tracks

The first step in rail crossing safety begins with route planning.  Commercial drivers should avoid railroad crossings whenever possible.  Officials who manage school or commercial busses should do the same when mapping out routes for such vehicles.

In the event a rail crossing is unavoidable, drivers should use the following procedures:

1. Keep an eye out for warning signs that railroad tracks are near.  The classic X-shaped round sign is the best indicator.  Also look for tracks paralleling the road and listen for the sound of a train whistle nearby.
2. When approaching a crossing, begin slowing the vehicle well ahead of time. 
3. Come to a stop between 15 and 50 feet from the tracks.  Use a pull-out lane if available.
4. Turn off the vehicle radio, fan or other climate control devices, roll down the driver’s window, and listen for a train.  School bus drivers should open the folding door and make sure the students are quiet during this time.
5. Look both ways for a train.  Then look again.  This is known as “doing a double take.”  If trees, posts, buildings, or other objects block a clear view, then rock back and forth if necessary to see around them.
6. Look for a stop sign or traffic light on the other side of the crossing.  If there is one, then judge whether the vehicle’s length will fit in between the sign or signal and the tracks (remember that trains extend past the track’s width as much as three feet on each side).  If there’s any doubt that the vehicle will fit within the available space, then don’t attempt to cross at that point.  Remember that both busses and trucks overhang their rear wheels by several feet.  Many times, an accident has occurred because the driver forgot this crucial fact.
7. Be especially alert to railroad crossing safety when the crossing encompasses multiple sets of tracks.  This is common near large urban areas.  Be certain to look both ways for each set, using the double-take method mentioned earlier.  For example, if the grade has three sets of tracks, look both ways a total of six times.  Make sure all the sets are clear before proceeding forward.  Also, keep an eye out while crossing the grade, just in case a train does appear.
8. If there is no sign of an approaching train, and if there is sufficient room beyond the tracks for the vehicle to fit, then proceed carefully over the crossing.  Do so in the lowest possible gear.  Under no circumstances should gear shifting occur at a railway grade.  This can cause the engine to stall at the worst possible moment.
9. After making the decision to pull forward, don’t stop.  Occasionally, a crossing gate on the far side of the grade may start to close after a vehicle has started to cross.  If this happens, then keep going.  Break through the gate if necessary, but under no circumstances stop the vehicle while crossing the tracks.
10. There’s a popular myth that says trains only run at certain times of the day.  Don’t believe it.  Train schedules can be highly irregular, depending on delivery schedules and other factors.  So, if you see tracks, always assume a train might be just down the tracks.

What to Do if the Vehicle Stalls on the Tracks

1. GET OUT.  Don’t stop to retrieve belongings.  Just exit the vehicle immediately.  Bus drivers should direct their passengers to leave in an orderly fashion.  If there is an emergency door at the rear of the bus, then this is the time to use it.  Evacuating the vehicle as quickly as possible is the highest priority when a stall occurs.
2. Someone near the crossing is an emergency phone number for the railroad.  Find the number and call it as soon as possible, so that any approaching trains can be warned ahead of time.  Remember that trains require a mile or more (the length of 18 football fields) to come to a complete stop, so giving the engineer as much advance notice as possible is crucial.
3. Call local law enforcement to advise them of the incident.  Commercial and school bus drivers should contact their superiors as well, to apprise them of the situation.  Under no circumstances should bus passengers be allowed to return to the vehicle for any reason.  Keep everyone calm until help arrives.
4. If a train is in sight, then immediately start running TOWARDS it, not away.  At the same time, stay as far from the tracks as possible.  This will minimize the risk of being struck by debris when the crash occurs, and it WILL occur if the train can be seen or heard.

Railroad Crossing Signs and Signals

1. The crossbuck sign consist of two white boards intersecting each other in an “x” shape.  It, along with the round crossing sign, is a sure signs that tracks are close by.
2. Sometimes the crossbuck sign is combined with a smaller one underneath that says how many sets of tracks lie ahead.  For example, a site with three sets will have the crossbuck sign and the message “three tracks” below.
3. The high center/high profile sign alerts drivers that the crossing isn't safe for low-clearance vehicles to use. 
4. Quiet zone signs usually say “no train horn.”  They indicate that the surrounding community has met the requirements to ban train whistles from being sounded within its limits.  In place of the whistle are enhanced crossing notices, including audible alerts that can only be heard from a short distance away.

Conclusion


Being a commercial driver entails demonstrating the highest levels of professionalism and devotion to safety at all times.  At no other time is this more important than when crossing railroad tracks.  Following the procedures outlined in this article will help to ensure greater safety for both motorists and the public in general.  

A Look at the Basics of Railroad Crossing Safety

While highway safety systems get a great deal of publicity, railroad crossing safety is a vital yet often overlooked part of accident prevention.  The lack of attention paid to the issue is tragic, as statistics reveal these sobering facts:

• Each year, over 2,000 collisions occur between motor vehicles and trains in the US.
• Those accidents are the cause of more than 200 deaths and 400 injuries each year.
• According to a study by the DOT, 94% of those incidents were caused by driver inattentiveness or disregard for safety.
• Almost 50% of vehicle-train collisions occur at crossings where warning devices such as lights and/or warning gates are in place.
• A train-related wreck is 20 times more likely to result in death than a collision with another motor vehicle.

The reasons why train wrecks so often lead to death come down to physics.  Simply put, the larger and heavier a moving object is, the more damage it will inflict on whatever it hits.  The typical train weighs in excess of 3,000 tons and can be more than a mile in length.  Stopping such a massive vehicle requires a length longer than 18 football fields lined up one after the other.  Even if the engineer sees someone on the tracks ahead, he or she won’t have time to stop before striking the person.  

Facts like these become more real to the average person when the national media reports on a tragic wreck.  One such incident occurred on November 16, 2012, when four persons were killed and 17 others injured in a collision that involved a parade float and a train in Midland, Texas.  The truck pulling the float was unable to pull forward due to vehicles in front of it, trapping it directly on the crossing.  The float was intended to honor military veterans, and in fact, several ex-servicemen and women were among those killed or seriously hurt.

Given the lethal potential of train collisions and the high number of incidents that occur each year, what can be done to safeguard the public?  Installing impassible barriers at crossing sites is simply not practical.  More than 200,000 miles of railroad tracks crisscross the United States, and the rails intersect with public roads at tens of thousands of locations.  If officials are to prevent these accidents, then the key to achieving this goal is public education.

The following is a list of safety fundamentals that should be rigorously taught to drivers.

• First, understand the message that railroad crossing safety signs are meant to convey.  They’re not intended to simply say “stop” or “slow down before you cross.”  Rather, they’re telling drivers to perform three specific actions:

1. Stop completely, and do so at least 15 feet away from the tracks.
2. Look in both directions.
3. Listen for a train.  If you need to, then roll down the windows, turn off the vehicle’s radio and climate control, and stop talking on the cell phone, but be sure that there’s no sound of a whistle or of an approaching locomotive.

• Only after fully completing the above three steps should motorists proceed over the tracks.
• Before starting to drive over the tracks, make sure there’s enough room to cross them completely.  In the Texas incident discussed above, a vehicle ahead of the parade float prevented the driver from moving forward, leading to the tragic outcome.  Don’t get stuck behind vehicles that are on the other side of the crossing.
• Be especially cautious when faced with double tracks.  Many people only pay attention to the first set, starting over the grade when it’s clear.  All too often, they fail to notice the train coming right at them on the second set of rails.  So exercise a higher degree of awareness when facing a dual-track crossing.
• Don’t pass other vehicles when approaching a crossing.  The car or truck in front may be blocking a clear view of an approaching train.  Also, the speed used in passing may prevent the driver from stopping before reaching the tracks.
• To ensure rail transit pedestrian safety, never walk on or near railroad tracks.  Some people think that railway corridors are public property, and use them as their own private hiking trail.  Others walk their dogs or jog alongside the tracks.  This is especially dangerous because such activities distract people from what’s going on around them.  These persons also tend to forget that trains are three feet wider on each side than the tracks they’re on.  Remember that these routes are owned by private companies, and respect them accordingly.
• Never, ever try to “beat” a train.  Approaching locomotives create an illusion that fools drivers into thinking that the engine is further away than it actually is.  Foolishly trying to outrun a 3,000-ton vehicle is simply that – foolish.
• Don’t fall for the misconception that trains always run at scheduled times.  Some people think it’s safe to cross the local grade because “trains never come by at this time of day anyway.”  In reality, railway companies frequently get behind their schedule or run ahead of it in order to complete deliveries in less time.  The lesson for motorists is to always assume a train is coming.
• If a crossing gate in front of your vehicle lowers while you’re crossing the tracks, then drive straight through it.  Don’t hesitate.  Doing so could cost you your life, if indeed a train is approaching.
• Never drive around lowered gates when approaching a crossing.  If the gate appears to be malfunctioning, and if there’s no sign of an approaching train, then look for a number posted at or near the crossing.  This is an emergency line for the freight company.  Call them at the earliest possible moment to alert them to the problem.

Despite the best of railroad crossing safety, sometimes train wrecks occur anyway.  This is often due to the vehicle breaking down while crossing the grade.  This happens more often than most people think.  Driving over tracks can cause tires to stick, scrape the bottom of the powertrain, or cause other damage that disables a car or truck.  When this occurs, those in the vehicle should do the following:

1. Get out of the car or truck immediately.  Don’t try to grab things from the trunk, rooftop, or back seat.  Get at least 50 feet from the tracks.
2.  Look and listen carefully for signs of an approaching train.  If there’s no sign of one, then look for the freight company’s emergency number at or near the crossing.  Call them as soon as possible to alert them to the stalled vehicle.  DO NOT go back to the car or truck, either to retrieve items or to attempt to fix the problem.  In the moments you’re doing so, a train could show up.
3. If a train is approaching when the vehicle stalls, then everyone must exit it immediately.  The driver and passengers should then run TOWARDS, not away from, the train, taking care to stay as far away from the tracks as possible while doing so.  Many people mistakenly believe that running from the train is the best course of action, but in reality this will expose them to debris flying off the tracks after the collision occurs.

As mentioned earlier, public education is the key to preventing train-related accidents.  Officials should strongly emphasize railroad crossing safety, both for new drivers seeking their licenses as well for as seasoned motorists.  As with so many things in life, knowledge makes all the difference when being around trains.


Reposted from www.impactrecovery.com

Traffic Separator Curbing is Tricky but Manageable

Traffic separator curbing is used to channelize travel lanes.  Normally constructed of tubular markers and high-density plastic curbs, it’s often used in temporary locations such as around construction sites.  As it must withstand the rigors of use around congested areas, it should meet the following criteria:

1. It should be able to absorb impacts from vehicles undamaged.  It should stay in its base even if struck multiple times.  It should also be unaffected by wide temperature ranges.
2. It should be continuous and bolted tightly to the underlying pavement.  Tubes must be bolted or pinned to the curb.  Curbing must be able to stay upright throughout the day and be unaffected by high winds and other weather phenomena.
3. Posts should be of standardized heights for the sake of both visibility and uniformity.  Commonly accepted heights are 36”, 42”, and 48”.
4. Delineator posts should be a minimum of three inches in diameter where it faces approaching traffic and at least two inches in diameters in all other directions.
5. Posts should have at least two reflective bands 3” wide or wider.  The higher band should be within two inches of the top of the structure.

The manual of Uniform Traffic Control Devices (MUTCD) lists seven principles for the use of all temporary traffic control (TTC) measures, including separator curbing:

1. The same principles that govern the creation of permanent road markers should be employed in designing TTCs.
2. TTCs should interfere with road worker’s movement as little as possible.
3. TTCs should give approaching motorist, bicyclists, and foot traffic adequate advance warning of changing traffic conditions.
4. TTC components should be regularly inspected during both day and night.
5. TTC placement should allow for vehicles to pull off the road surface in cases of accidents and/or mechanical trouble.
6. Those who work around TTC structures should be trained in their use.
7. The needs of motorists, nearby property owners, emergency responders, and the community at large should be addressed when planning the use of TTCs.

By following these guidelines, traffic separator curbing and other TTC measures can be an enhancement to public safety, not a hindrance.